Zebra ZT600 Series User Manual

Printer Setup and Operation
62
4. Plug the female end of the A/C power cord into the A/C power connector on the back of the printer.
5. Plug the male end of the A/C power cord into an appropriate power outlet.
6. Turn on (I) the printer.
As the printer boots up, your computer completes the driver installation and recognizes your printer.
The installation for the USB connection is complete.
100 – 240 VAC
50 – 60 Hz

Zebra ZT600 Series Specifications

General

Print Method	Thermal Transfer/Direct Thermal
Print Resolution	203 dpi/8 dots per mm; 300 dpi/12 dots per mm
Maximum Print Width	4.09 in./104 mm
Maximum Print Speed	14 ips (356 mm/s) for 203 dpi, 12 ips (305 mm/s) for 300 dpi
Media Sensors	Reflective and Transmissive
Communication	USB, Serial, Ethernet, Bluetooth
Memory	512 MB Flash
Operating Temperature	5°C to 40°C