Aastra Ascotel IntelliGate 2065 - Page 643

Ascotel IntelliGate 2025/2045/2065
Part 3 Planning DECT systems 643
Fig. 3.38: Test modes the Office 100 handset
i M
65
– – – – – –
go clr
i M
1010 0 17 65
tick.
1/08 ⇓
i M
1010 0 17 65
tick
1/08 ⇓
&A
Test System
&A
Look Show HO
i M
1010 0 17 65
go
1/08 ⇓
i M
1010 0 17 65
lock
1/08 ⇓
i M
1010 0
s17 65
Hoff
####
i M
65.
– – – – – –
stop clr
i M
1010 0 17 65
go
1/08 ⇓
i M
1010 0 13 39
go
1/08 ⇓
i M
65
< – – – – – –
stop clr
i
– – – – – – – – – –
Hoff .
i M
1010 0 17 65
1000101011
i M
65
– – – – – –
stop clr
M
M
Programming menu 5
The aerial symbol and the
system icon are not active
in test mode.
C also displays the previous menu.
see the following figure
The list can be scrolled
with the fox key.
i always generates the
full RFPI of the currently
displayed radio unit.
Back with i.
If a point is displayed next
to the value, this radio unit
was not visible in the last
measurement.
If a point is displayed next
to the value, this radio unit
was not visible in the last
measurement.
An arrow next to the
value indicates to which
radio unit the information
belongs.
If the radio unit signal is
too weak to measure,
a line is shown.
For Hoff and Hon see the following figures
Access with menu key via the normal menu structure
haz1302aaena0
M
M
M