Aastra Ascotel IntelliGate 2065 - Page 642

Ascotel IntelliGate 2025/2045/2065
642 Planning DECT systems Part 3
Menu 1: "Look"
This menu takes you to the menus for measuring the coverage ranges of radio
units.
Fig. 3.37: Look-around mode
In this mode the handset recognizes up to 10 radio units in whose coverage area
it is situated.
• The right-hand Foxkey can be used to browse through the radio units
(Display 1, see Fig. 3.44 and Tab. 3.23).
• The radio unit to be measured out can be selected with the M key and viewed
on the handset’s display (display 2, see Fig. 3.46).
• The full RFPI of the currently displayed radio unit is always displayed with the
”i” key.
The field strength of 4 radio units simultaneously can be shown on the handset’s
display. For measurement-related reasons this is however not recommended! The
Foxkey ”Tick" is used to select which radio units are to be displayed together (Tab.
3.24). With the M key you can branch to "Idle Lock" (Tab. 3.26) and with the
Foxkey further to "Locked" (Tab. 3.27)
Menu 2: "Show HO"
This menu indicates the handover behaviour when switching over to another
radio unit (page 654).
7
4
1
S
T
U
J
K
L
A
B
C
0
0
.
.
.
9
8
5
2
D
E
F
M
N
O
V
W
X
9
6
3
G
H
I
P
Q
R
Y
Z
•
M
C
E
n
d
RU A
RU B
Existing
DECT system
DECT
haz0339aaena0