CELL-DYN 3000 System Operator’s Manual 5-51
9140240E — May 1995
Chapter 5 Operating Instructions
Routine Operation
Introduction
This section contains information and procedures that are recommended
for the routine operation of the CELL-DYN 3000. The Sample Analysis
section gives instructions for running samples on both the Sample Loader
and Closed Sampler versions of the CELL-DYN 3000. For convenience,
instructions for running samples in the Open Mode are included in each
section. Refer to Chapter 12, Sample Loader, for a complete description
of Sample Loader and to Appendix A, Bar Codes, for information on the
use of bar code labels.
A description of the Data Station RUN MENU and the sub-menus that
are accessed from it is given at the beginning of this section. The RUN
MENU is the same for both versions of the instrument.
To Next Page
Loading...
