9-46 CELL-DYN 3000 System Operator’s Manual
9140240E — May 1995
Maintenance Chapter 9
5. Remove the reagent inlet and waste outlet tubes. Place each tube in
a protective plastic bag and put the bags in the accessory kit.
WARNING: Potential Biohazard. Follow established
biosafety practices when performing maintenance, service or
troubleshooting procedures. Wear gloves, lab coat, and suitable
eye protection. Refer to Chapter 8, Precautions, Limitations and
Hazards, for additional information.
6. Replace the front covers.
7. Wipe the surface of the instrument with disinfectant. Refer to
Chapter8, Precautions, Limitations and Hazards, for additional
information.
Repackaging for Shipment
When the CELL-DYN 3000 is to be shipped and the original packaging
is available, repackage the instrument as it was originally shipped.
When the instrument is to be shipped and the original packaging is
unavailable, call the Customer Support Center for assistance with
repackaging the unit for shipment at 1 (800) CELL DYN.
To Next Page
Loading...
