CELL-DYN 3000 System Operator’s Manual 2-5
9140240E — May 1995
Chapter 2 Installation
IMPORTANT: CELL-DYN 3000 software automatically
controls and adjusts most print conditions for the graphics
printer, including page width. Occasionally, a few settings may
need to be changed in the printer's software for correct
operation. If printing is not what you expect, refer to the printer
manual for guidance in making adjustments. If you have
additional questions or experience any problems, call the
Abbott Customer Support Center for assistance at 1 (800)
CELL DYN or
1 (800) 235-5396 (U.S. customers only).
Ticket Printer
Installation Procedure
The ticket printer is used to print result data on blank or pre-printed
tickets. (Blank tickets are available in continuous tractor-feed sheets.
Pre-printed tickets are loaded individually.)
To print tickets, the printer cable must be connected to the ticket printer
connector on the back of the Data Station. (See Figure 2.1 for the
location of these connectors.) Refer to the Customize Printout section in
the Setup section of Chapter 5, Operating Instructions, for instructions
for customizing either type of printout.
To Next Page
Loading...
