CELL-DYN 3000 System Operator’s Manual 12-15
9140240E — May 1995
Chapter 12 Sample Loader
Routine Operating Procedures
Directions for Routine Operating Procedures with the Sample Loader are
given in Chapter 5, Operating Instructions.
Maintenance
Maintenance procedures on the Sample Loader should be performed as
directed in Chapter 9, Maintenance. These procedures consist of the
daily cleaning of the vent and aspiration needles and the weekly cleaning
of the tray and the tube racks. If the vent or aspiration needle requires
replacement, refer to Chapter 10, Troubleshooting.
Installation
For detailed instructions on how to install the Sample Loader, refer to
Chapter2, Installation.
Troubleshooting
If a Sample Loader fault, error, or other problem is detected, an alert
message is displayed on the bulletin line of the screen. For a description
of the fault, go to the DIAGNOSTICS MENU. For a list of messages,
descriptions of possible problems and recommended actions, refer to
Chapter10, Troubleshooting.
To Next Page
Loading...
