CELL-DYN 3000 System Operator’s Manual 7-3
9140240E — May 1995
Chapter 7 Quality Control
Quality Control Menu
This section discusses the options available when the [QC LOGS] key
on the MAIN MENU is pressed. The options used to set up the QC files
are available from the QC MENU (see Figure 7.1) and the QC SETUP
MENU. Refer to the Set Up QC Files section of Chapter 5, Operating
Instructions, for an explanation of these keys as they will not be
discussed in this section.
The following soft key labels are displayed when the [QC LOGS] key
on the MAIN MENU Screen is pressed:
X-B SETUP*
X-B FILE
VIEW QC LOG
QC LIMITS*
SET UP QC FILE*
CUSTOMIZE DISPLAY*
CUSTOMIZE PRINTOUT*
MAIN
*These keys are discussed in Chapter 5, Operating Instructions.
QC LOGS
To Next Page
Loading...
