Abbott CELL-DYN 3000 - CELL-DYN Bar Code Labels; CELL-DYN Q Labels; Figure A.1: Bar Code Label Specifications

A-4 CELL-DYN 3000 System Operator’s Manual
9140240E — May 1995
Bar Codes Appendix A
Figure A.1: Bar Code Label Specifications
CELL-DYN Bar Code Labels
CELL-DYN 4-digit bar code labels (Code 39 Format) are available for
the Sample Loader (L/N 99650-01 for one roll, or L/N 99651-01 for a
box of ten). These labels may be used for positive specimen
identification when laboratory-generated bar code labels are unavailable.
CELL-DYN Q Labels
Special bar code labels are available to identify QC specimens. These
“Q” labels (numbers Q1– Q20, L/N 99652-01) automatically select QC
files 1 to 20, and therefore should be used to process only QC specimens.
Minimum
Quiet Zone
0.25 inches
Maximum
Label Length
2.0 inches
Minimum Bar Length
0.5 inches
Maximum Label Width
1.25 inches
Search
Go Back
Book TOCBook TOC