Abbott CELL-DYN 3000 - Page 235

5-106 CELL-DYN 3000 System Operator’s Manual
9140240E — May 1995
Operating Instructions Chapter 5
NOTE: If all samples are rejected from the current X-B batch,
it is not possible to accept any of them back into the X-B
analysis.
Figure 5.39: Customize Display for Data Log Screen
The [CUSTOMIZE DATA LOG] key is used to customize the Data Log
display. The CUSTOMIZE DISPLAY FOR DATA LOG Screen (see
Figure 5.39) and the following soft key labels are displayed when the
[CUSTOMIZE DATA LOG] key is pressed:
SELECT PARAMETER or
PLACE PARAMETER (The key alternates between these
two selections.)
STANDARD GROUPS or
CUSTOM PLACEMENT (The key alternates between these
two selections.)
CUSTOMIZE PRINTOUT
RETURN
WBC NEU LYM MONO EOS BASO
RBC HGB HCT MCV MCH MCHC RDW
PLT MPV UMT1 CNT1
WBC %N %L %M %E %B
WBC NEU LYM MONO EOS BASO
RBC HGB HCT MCV MCH MCHC RDW
PLT MPV PCT PDW
%N %L %M %E %B
UMT1 UMT2 CNT1 CNT2 EMPTY
SELECT
PARAMETER
STANDARD
GROUPS
CUSTOMIZE
PRINTOUT
RETURN
CUSTOMIZE DISPLAY
Ready
Dec 18 1992
Operator ID
Sequence #
10:29
734
0630
FOR DATA LOG
Group 1:
Group 2:
Group 3:
Group 4:
CUSTOMIZE
DATA LOG
Search
Go Back
Book TOC