CELL-DYN 3000 System Operator’s Manual 10-21
9140240E — May 1995
Chapter 10 Troubleshooting
This key is used to display the software version installed in the Sample
Loader. The Sample Loader must be ON before the key is pressed. When
the [AUTO-SAMP VERSION] key is pressed, the screen displays the
following message (see Figure 10.18):
AUTO-SAMPLER SOFTWARE: followed by the version
information
NOTE: This key is displayed on the CELL-DYN 3000SL only.
Figure 10.18: Auto-Sampler Version Screen
This key is for service use only and is displayed on the CELL-DYN
3000SL only.
This key is for service use only and is displayed on the CELL-DYN
3000SL only.
AUTO-SAMP
VERSION
AUTO-SAMP
VERSION
BAR CODE
ALIGNMENT
BAR CODE
VERIFY
SERIAL
TEST
MORE PRINT MAIN
DIAGNOSTICS MENU
Ready
Jan 18 1993
Operator ID
Sequence #
12:50
734
3122
Auto-Sampler Software : F:VER 1.19 04-10-92
BAR CODE
ALIGNMENT
BAR CODE
VERIFY
To Next Page
Loading...
