Agilent Technologies 1100 Series Reference Manual

Repairing the Fluorescence Detector 5
1100 Series FD Reference Manual 171
Next Steps:
• Replace the covers as described in “Replacing the Foams and Covers" on page 196.
• Re-install the flow cell and the front panel.
• Re-install the detector in the stack.
• Turn the lamp on.
• Perform a wavelength verification to check the correct positioning of the replaced assemblies, as described in chapter
“Wavelength Verification and Calibration" on page 101.

Agilent Technologies 1100 Series Specifications

General

Brand	Agilent Technologies
Model	1100 Series
Category	Laboratory Equipment
Language	English