Agilent Technologies 1100 Series Reference Manual

184 1100 Series FD Reference Manual
5 Repairing the Fluorescence Detector
2 Using the 4 mm hexagonal key, unscrew the five screws
and lift the cover.
3 Using the 2.5 mm hexagonal key, unscrew the two screws
and remove the pad (A).
4 Remove the lamp as described in “Exchanging the
Lamp" on page 147.
5 Disconnect the wires from the connector. Use a flat screw
driver to release the wires.
A
B
A
B
A
A
AB
FLL Board

Agilent Technologies 1100 Series Specifications

General

Brand	Agilent Technologies
Model	1100 Series
Category	Laboratory Equipment
Language	English