Agilent Technologies E4406A VSA Series User Manual

190 Chapter5
Language Reference
CALCulate Subsystem
Marker Peak (Minimum) Search
:CALCulate:<measurement>:MARKer[1]|2|3|4:MINimum
Places the selected marker on the lowest point on the trace that is
assigned to that particular marker number.
The marker must have already been assigned to a trace. Use
:CALCulate:<measurement>:MARKer[1]|2|3|4:TRACe to assign a
marker to a particular trace.
Example: CALC:SPEC:MARK2:MIN
Remarks: The keyword for the current measurement must be
specified in the command. (Some examples include:
SPECtrum, WAVeform)
Marker Mode
:CALCulate:<measurement>:MARKer[1]|2|3|4:MODE
POSition|DELTa
:CALCulate:<measurement>:MARKer[1]|2|3|4:MODE?
Selects the type of marker to be a normal position-type marker or a
delta marker.A specific measurement may not have both types of
markers. For example, several measurements only have position
markers.
The marker must have already been assigned to a trace. Use
:CALCulate:<measurement>:MARKer[1]|2|3|4:TRACe to assign a
marker to a particular trace.
Example: CALC:SPEC:MARK:MODE DELTA
Remarks: For the delta mode only markers 1 and 2 are valid.
The keyword for the current measurement must be
specified in the command. (Some examples include:
SPECtrum, WAVeform)
Front Panel
Access:
Marker, Marker [Delta]

Agilent Technologies E4406A VSA Series Specifications

General

Brand	Agilent Technologies
Model	E4406A VSA Series
Category	Test Equipment
Language	English