Chapter 5 363
Language Reference
SYSTem Subsystem
SYSTem Subsystem
This subsystem is used to set the controls and parameters associated
with the overall system communication. These are functions that are
not related to instrument performance. Examples include functions for
performing general housekeeping and functions related to setting
global configurations.
GPIB Address
:SYSTem:COMMunicate:GPIB[:SELF]:ADDRess <integer>
:SYSTem:COMMunicate:GPIB[:SELF]:ADDRess?
Sets and queries the GPIB address.
Factory Preset
and *RST: Persistent State with factory default of 18
Range: Integer, 0 to 30
Front Panel
Access:
System, Config I/O, GPIB Addr
LAN IP Address & Domain Name
:SYSTem:COMMunicate:LAN[:SELF]:IP <string>
:SYSTem:COMMunicate:LAN[:SELF]:IP?
Set the IP (internet protocol) address, domain name and node name for
the instrument.
<string> is a string that contains: <IP address> <domain name>, and
<node name> with a form as shown in the following example:
15.4.402.222 at35.sr.hp.com at25 betabox
Front Panel
Access:
System, Config I/O, Config LAN
To Next Page
Loading...
Need help?
General
