Agilent Technologies E4406A VSA Series - Channel Burst Type

294 Chapter5
Language Reference
SENSe Subsystem
Channel Burst Type
[:SENSe]:CHANnel:BURSt NORMal|SYNC|ACCess
[:SENSe]:CHANnel:BURSt?
Set the training sequence code that the analyzer will search for and
sync to. This only applies with normal burst selected.
Normal: Traffic Channel (TCH) and Control Channel (CCH)
Sync: Synchronization Channel (SCH)
Access: Random Access Channel (RACH)
Remarks: Global to the current mode.
You must be in the EDGE(w/GSM), GSM mode to use
this command. Use INSTrument:SELect to set the
mode.
Front Panel
Access:
FREQUENCY Channel, Burst Type
Digital Demod PN Offset
[:SENSe]:CHANnel:PNOFfset <integer>
[:SENSe]:CHANnel:PNOFfset?
Set the PN offset number for the base station being tested.
Factory Preset
and *RST: 0
Range: 0 to 511
Default Unit: None
Remarks: Global to the current mode.
You must be in the cdmaOne mode to use this
command. Use INSTrument:SELect to set the mode.
Front Panel
Access:
FREQUENCY Channel, PN Offset
or
Mode Setup, Demod, PN Offset