318 Chapter5
Language Reference
SENSe Subsystem
Radio Device Under Test
[:SENSe]:RADio:DEVice BTS|MS
[:SENSe]:RADio:DEVice?
Select the type of radio device to be tested.
BTS - Base station transmitter test
MS - Mobile station transmitter test
Factory Preset
and *RST: BTS
Remarks: Global to the current mode.
You must be in cdma2000, EDGE(w/GSM), GSM,
W-CDMA (3GPP), or W-CDMA (Trial & Arib) mode to
use this command. Use INSTrument:SELect to set the
mode.
History: Version A.03.00 or later
Front Panel
Access:
Mode Setup, Radio, Device
Radio Device Under Test
[:SENSe]:RADio:DEVice INBound|OUTBound
[:SENSe]:RADio:DEVice?
Select the type of radio device to be tested. If you are testing a base
station, it must be put into the test mode to transmit known bit
patterns.
Outbound – Base station transmitter test
Inbound – Mobile station transmitter test
Factory Preset
and *RST: BS
Remarks: You must be in the iDEN mode to use this command.
Use INSTrument:SELect to set the mode.
Global to current mode.
Front Panel
Access:
Mode Setup, Radio, Device
To Next Page
Loading...
Need help?
General
