Agilent Technologies E4406A VSA Series - Front Panel External Trigger Level

372 Chapter5
Language Reference
TRIGger Subsystem
Front Panel External Trigger Level
:TRIGger[:SEQuence]:EXTernal[1]:LEVel <voltage>
:TRIGger[:SEQuence]:EXTernal[1]:LEVel?
Set the trigger level when using the front panel external trigger input.
Factory Preset
and *RST: 2.0 V
Range: −5.0 to +5.0 V
Default Unit: volts
Front Panel
Access:
Mode Setup, Trigger, Ext Front, Level
Front Panel External Trigger Slope
:TRIGger[:SEQuence]:EXTernal[1]:SLOPe NEGative|POSitive
:TRIGger[:SEQuence]:EXTernal[1]:SLOPe?
Sets the triggering to occur on a positive-going edge or a negative-going
edge of the trigger when using the front panel external trigger input.
Factory Preset
and *RST: Positive
Front Panel
Access:
Mode Setup, Trigger, Ext Front, Slope
Rear Panel External Trigger Delay
:TRIGger[:SEQuence]:EXTernal2:DELay <time>
:TRIGger[:SEQuence]:EXTernal2:DELay?
Set the trigger delay when using the rear panel external trigger.
Factory Preset
and *RST: 0.0 s
Range: −500.0 ms to 500.0 ms
−100.0 ms to 500.0 ms for cdma2000, W-CDMA (3GPP),
W-CDMA (Trial & ARIB)
Default Unit: seconds
Front Panel
Access:
Mode Setup, Trigger, Ext Rear, Delay