Agilent Technologies E4406A VSA Series - Clearing the Error Queue

384 Chapter6
Error Messages
Error Queues
Clearing the Error Queue
The error queue will only be cleared upon:
• power up
• receipt of a *CLS command
• reading the last error from the queue
No Error
When all the errors have been read from the queue, further error
queries will return:
(0) No error
This message indicates that the error queue contains no errors.
(Number) Description
(0) No error
The queue is empty. Every error in the queue has been
read or the queue was purposely cleared by power-on or
*CLS.