350 Chapter5
Language Reference
STATus Subsystem
NOTE The register requires that the associated PTR or NTR filters be set
before a condition register bit can set a bit in the event register.
The data in this register is latched until it is queried. Once queried, the
register is cleared.
Operation Negative Transition
BASE
:STATus:OPERation:NTRansition?
This command determines what bits in the Operation Condition
register will set the corresponding bit in the Operation Event register
when the condition register bit has a negative transition (1 to 0). The
variable <number> is the sum of the decimal values of the bits that you
want to enable.
Factory Preset
and *RST: 0
Range: 0 to 32767
Operation Positive Transition
BASE
:STATus:OPERation:PTRansition?
This command determines what bits in the Operation Condition
register will set the corresponding bit in the Operation Event register
when the condition register bit has a positive transition (0 to 1). The
variable <number> is the sum of the decimal values of the bits that you
want to enable.
Factory Preset
and *RST:
Range: 0 to 32767
To Next Page
Loading...
