Chapter 5 317
Language Reference
SENSe Subsystem
Radio Carrier Burst
[:SENSe]:RADio:CARRier[:TYPE] BURSt|CONTinuous
[:SENSe]:RADio:CARRier[:TYPE]?
Select the type of RF carrier on the device to be tested.
Factory Preset
and *RST: Burst
Remarks: You must be in the EDGE(w/GSM), GSM mode to use
this command. Use INSTrument:SELect to set the
mode.
Global to the current mode.
History: Version A.03.00 or later
Front Panel
Access:
Mode Setup, Radio, Carrier
Radio Device Under Test
[:SENSe]:RADio:DEVice BS|MS
[:SENSe]:RADio:DEVice?
Select the type of radio device to be tested.
BS – Base station transmitter test.
MS – Mobile station transmitter test.
Factory Preset
and *RST: BS
Remarks: You must be in the NADC, or PDC mode to use this
command. Use INSTrument:SELect to set the mode.
Global to current mode.
Front Panel
Access:
Mode Setup, Radio, Device