Chapter 5 293
Language Reference
SENSe Subsystem
Select the Highest ARFCN
[:SENSe]:CHANnel:ARFCn|RFCHannel:TOP
Set the analyzer to the frequency of the highest ARFCN (Absolute RF
Channel Number) of the selected radio band.
Factory Preset
and *RST: 124 for E-GSM
124 for P-GSM
124 for R-GSM
885 for DCS1800
810 for PCS1900
293 for GSM450
340 for GSM480
251 for GSM850
Remarks: You must be in the EDGE(w/GSM), GSM mode to use
this command. Use INSTrument:SELect to set the
mode.
Global to the current mode.
History: Version A.03.00 or later
Front Panel
Access:
FREQUENCY Channel, BMT Freq
Burst Type
[:SENSe]:CHANnel:BURSt TCH|CCH
[:SENSe]:CHANnel:BURSt?
Set the burst type for mobile station testing.
Traffic Channel (TCH) – burst for traffic channel
Control Channel (CCH) – burst for control channel
Factory Preset
and *RST: TCH
Remarks: The command is only applicable for mobile station
testing, device = MS.
You must be in the NADC or PDC mode to use this
command. Use INSTrument:SELect to set the mode.
To Next Page
Loading...
Need help?
General
