Chapter 5 295
Language Reference
SENSe Subsystem
RF Channel Number
[:SENSe]:CHANnel:RFCHannel[:NUMBer] <integer>
[:SENSe]:CHANnel:RFCHannel[:NUMBer]?
Set the analyzer to a frequency that corresponds to the RF channel
number.
Factory Preset
and *RST: 1
Range: IS-95A—1 to 799 and 991 to 1023
J-STD-008—0 to 1199
ARIB STD-T53—1 to 799, 801-1039, 1041-1199
TTA.KO-06.0003 (Korea Cell)—1 to 799 and 991 to 1023
TTA.KO-06.0013 (Korea PCS)—1 to 599
TIA-95B Cell—1 to 799 and 991 to 1023
TIA-95B PCS—0 to 1199
TIA-95C Cell—1 to 799 and 991 to 1023
TIA-95C PCS—0 to 1199
History: Version A.04.00 or later.
Remarks: Global to the current mode.
You must be in the cdmaOne mode to use this
command. Use INSTrument:SELect to set the mode.
Front Panel
Access:
FREQUENCY Channel, RF Channel Number
To Next Page
Loading...
