290 Chapter5
Language Reference
SENSe Subsystem
Select the ARFCN—Absolute RF Channel Number
[:SENSe]:CHANnel:ARFCn|RFCHannel <integer>
[:SENSe]:CHANnel:ARFCn|RFCHannel?
Set the analyzer to a frequency that corresponds to the ARFCN
(Absolute RF Channel Number).
Factory Preset
and *RST: 38
Range: 0 to 124, and 975 to 1023 for E-GSM
1 to 124 for P-GSM
0 to 124, and 955 to 974 for R-GSM
512 to 885 for DCS1800
512 to 810 for PCS1900
259 to 293 for GSM450
306 to 340 for GSM480
128 to 251 for GSM850
Remarks: You must be in the EDGE(w/GSM), GSM mode to use
this command. Use INSTrument:SELect to set the
mode.
Global to the current mode.
History: Version A.03.00 or later
Front Panel
Access:
FREQUENCY Channel, ARFCN
To Next Page
Loading...
Need help?
General
