188 Chapter5
Language Reference
CALCulate Subsystem
Markers All Off on All Traces
:CALCulate:<measurement>:MARKer:AOFF
Turns off all markers on all the traces in the specified measurement.
Example: CALC:SPEC:MARK:AOFF
Remarks: The keyword for the current measurement must be
specified in the command. (Some examples include:
SPECtrum, WAVeform)
Front Panel
Access:
Marker, More, Marker All Off
Marker Function
:CALCulate:<measurement>:MARKer[1]|2|3|4:FUNCtion
BPOWer|NOISe|OFF
:CALCulate:<measurement>:MARKer[1]|2|3|4:FUNCtion?
Selects the type of marker for the specified marker. A particular
measurement may not have all the types of markers that are commonly
available.
The marker must have already been assigned to a trace. Use
:CALCulate:<measurement>:MARKer[1]|2|3|4:TRACe to assign a
marker to a particular trace.
Band Power − is the integrated power between the two markers for
traces in the frequency domain and is the mean power between the
two markers for traces in the time domain.
Noise − is the noise power spectral density in a 1 Hz bandwidth. It is
averaged over 32 horizontal trace points.
Off − turns off the marker functions
Example: CALC:SPEC:MARK3:FUNC Noise
Remarks: The keyword for the current measurement must be
specified in the command. (Some examples include:
SPECtrum, WAVeform)
Front Panel
Access:
Marker, Marker Function
To Next Page
Loading...
