Agilent Technologies E4406A VSA Series - Off|On|0|1, Off|On|0|1

Chapter 5 271
Language Reference
SENSe Subsystem
Adjacent Channel Power—Automatic FFT Segments
[:SENSe]:ACP:OFFSet:LIST:FFTSegment:AUTO OFF|ON|0|1,
OFF|ON|0|1, OFF|ON|0|1, OFF|ON|0|1, OFF|ON|0|1
[:SENSe]:ACP:OFFSet:LIST:FFTSegment:AUTO?
The automatic mode selects the optimum number of FFT segments to
make the fastest possible measurement.
Factory Preset
and *RST:
Remarks: You must be in Basic mode to use this command. Use
INSTrument:SELect to set the mode.
History: Revision A.03.00 or later
Adjacent Channel Power—Define Offset Frequency List
iDEN mode
[:SENSe]:ACP:OFFSet[:FREQuency] <f_offset>
[:SENSe]:ACP:OFFSet[:FREQuency]?
Basic mode
[:SENSe]:ACP:OFFSet:LIST[:FREQuency]
<f_offset>,<f_offset>,<f_offset>,<f_offset>,<f_offset>
[:SENSe]:ACP:OFFSet:LIST[:FREQuency]?
cdma2000, W-CDMA (3GPP) mode
[:SENSe]:ACP:OFFSet[n]:LIST[:FREQuency]
<f_offset>,<f_offset>,<f_offset>,<f_offset>,<f_offset>
[:SENSe]:ACP:OFFSet[n]:LIST[:FREQuency]?
cdmaOne, W-CDMA (Trial & Arib) mode
[:SENSe]:ACP:OFFSet[n]:LIST[n][:FREQuency]
<f_offset>,<f_offset>,<f_offset>,<f_offset>,<f_offset>
[:SENSe]:ACP:OFFSet[n]:LIST[n][:FREQuency]?
Mode Offset A Offset B Offset C Offset D Offset E
Basic &
cdmaOne
On On On On On