Agilent Technologies E4406A VSA Series - Sense]:Acp:points:auto OFF|ON|0|1

286 Chapter5
Language Reference
SENSe Subsystem
Adjacent Channel Power—Automatic Measurement Points
[:SENSe]:ACP:POINts:AUTO OFF|ON|0|1
[:SENSe]:ACP:POINts:AUTO?
Automatically selects the number of points for the optimum
measurement speed.
Factory Preset
and *RST: On
Remarks: You must be in Basic, cdmaOne mode to use this
command. Use INSTrument:SELect to set the mode.
Adjacent Channel Power—Spectrum Trace Control
[:SENSe]:ACP:SPECtrum:ENABle OFF|ON|0|1
[:SENSe]:ACP:SPECtrum:ENABle?
Turns on/off the measurement of the spectrum trace data when the
spectrum view is selected. (Select the view with DISPlay:ACP:VIEW.)
You may want to disable the spectrum trace data part of the
measurement so you can increase the speed of the rest of the
measurement data.
Factory Preset
and *RST: On
Remarks: You must be in Basic, cdmaOne, iDEN mode to use this
command. Use INSTrument:SELect to set the mode.
History: Revision A.03.27 or later, in cdmaOne revision A.04.00