Agilent Technologies E4406A VSA Series - Sense]:Chpower:frequency:span Freq

Chapter 5 301
Language Reference
SENSe Subsystem
Channel Power—Span
[:SENSe]:CHPower:FREQuency:SPAN <freq>
[:SENSe]:CHPower:FREQuency:SPAN?
Set the frequency span that will be used.
Factory Preset
and *RST: 2.0 MHz for Basic, cdmaOne, cdma2000
6.0 MHz for W-CDMA (3GPP), W-CDMA (Trial & Arib)
Range: 1.0 kHz to 10.0 MHz
Default Unit: Hz
Remarks: You must be in the cdmaOne, cdma2000, W-CDMA
(3GPP), W-CDMA (Trial & Arib), or Basic mode to use
this command. Use INSTrument:SELect to set the
mode.
Channel Power—Data Points
[:SENSe]:CHPower:POINts <integer>
[:SENSe]:CHPower:POINts?
Set the number of data points that will be used. Changing this will
change the time record length and resolution BW that are used.
Factory Preset
and *RST: 512
Range: 64 to 32768, in a 2
n
sequence
Remarks: You must be in the cdmaOne, cdma2000, W-CDMA
(3GPP), W-CDMA (Trial & Arib), or Basic mode to use
this command. Use INSTrument:SELect to set the
mode.