Agilent Technologies E4406A VSA Series - Page 267

Chapter 5 267
Language Reference
SENSe Subsystem
The query returns five (5) real numbers that are the current absolute
amplitude test limits.
Offset[n] n=1 is base station and 2 is mobiles. The default is base
station (1).
List[n]
cdmaOne mode n=1 is cellular bands and 2 is pcs bands. The default is
cellular.
W-CDMA (Trial
& Arib) mode n=1 is ARIB, 2 is 3GPP, and 3 is Trial. The default is
ARIB (1).
Factory Preset
and *RST:
Range: −200.0 dBm to 50.0 dBm
Default Unit: dBm
Remarks: You must be in Basic, cdmaOne, cdma2000, W-CDMA
(3GPP), W-CDMA (Trial & Arib), or iDEN mode to use
this command. Use INSTrument:SELect to set the
mode.
Mode Variant Offset A Offset B Offset C Offset D Offset E
Basic 0 dBm 0 dBm 0 dBm 0 dBm 0 dBm
cdmaOne BS cellular 0 dBm 0 dBm 0 dBm 0 dBm 0 dBm
BS pcs 0 dBm −13 dBm −13 dBm 0 dBm 0 dBm
MS cellular 0 dBm 0 dBm 0 dBm 0 dBm 0 dBm
MS pcs 0 dBm −13 dBm −13 dBm 0 dBm 0 dBm
cdma2000 50 dBm 50 dBm 50 dBm 50 dBm 50 dBm
W-CDMA
(3GPP)
50 dBm 50 dBm 50 dBm 50 dBm 50 dBm
W-CDMA (Trial
& Arib)
50 dBm 50 dBm 50 dBm 50 dBm 50 dBm
iDEN 0 dBm n/a n/a n/a n/a