Agilent Technologies E4406A VSA Series User Manual

Chapter 5 269
Language Reference
SENSe Subsystem
Define the custom resolution bandwidth(s) for the adjacent channel
power testing. If there is more than one bandwidth, the list must
contain five (5) entries. Each resolution bandwidth in the list
corresponds to an offset frequency in the list defined by
[:SENSe]:ACP:OFFSet[n]:LIST[n][:FREQuency]. You can turn off (not
use) specific offsets with the [:SENSe]:ACP:OFFSet[n]:LIST[n]:STATe
command.
Offset[n] n=1 is base station and 2 is mobiles. The default is base
station (1).
List[n]
cdmaOne mode n=1 is cellular bands and 2 is pcs bands. The default is
cellular.
W-CDMA (Trial
& Arib) mode n=1 is ARIB, 2 is 3GPP, and 3 is Trial. The default is
ARIB (1).
Factory Preset
and *RST:
Range: 300 Hz to 20 MHz for cdmaOne, Basic, cdma2000,
W-CDMA (3GPP), or W-CDMA (Trial & Arib) mode
1 kHz to 5 MHz for iDEN mode
Default Unit: Hz
Mode Variant Offset A Offset B Offset C Offset D Offset E
iDEN 10 kHz n/a n/a n/a n/a
Basic 30 kHz 30 kHz 30 kHz 30 kHz 30 kHz
cdmaOne BS cellular 30 kHz 30 kHz 30 kHz 30 kHz 30 kHz
BS pcs 30 kHz 12.5 kHz 1 MHz 30 kHz 30 kHz
MS cellular 30 kHz 30 kHz 30 kHz 30 kHz 30 kHz
MS pcs 30 kHz 12.5 kHz 1 MHz 30 kHz 30 kHz
cdma2000 30 kHz 30 kHz 30 kHz 30 kHz 30 kHz
W-CDMA
(3GPP)
3.84 MHz 3.84 MHz 3.84 MHz 3.84 MHz 3.84 MHz
W-CDMA
(Trial & Arib)
3GPP 3.84 MHz 3.84 MHz 3.84 MHz 3.84 MHz 3.84 MHz
Trial, ARIB 4.096 MHz 4.096
MHz
4.096
MHz
4.096
MHz
4.096
MHz

Agilent Technologies E4406A VSA Series Specifications

General

Brand	Agilent Technologies
Model	E4406A VSA Series
Category	Test Equipment
Language	English