EasyManua.ls Logo

Alcatel-Lucent OmniSwitch 6800 Series - Page 915

Alcatel-Lucent OmniSwitch 6800 Series
926 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
OmniSwitch 6800/6850/9000 Network Configuration Guide March 2008 page -3
Bridge Protocol Data Units
contents 8-8
bridge slot/port command 8-25
bridge slot/port connection command 8-36
bridge slot/port path cost command 8-33
bridge slot/port priority command 8-31
built-in port groups 18-12
used with Policy Based Routing 18-62
C
clear arp filter command 6-14
clear arp-cache command 6-13
clear ipx route command 12-14
combo ports 25-4
application examples 25-24
configuring 25-18
defaults 25-3
forced copper 25-4
forced fiber 25-4
overview 25-4
preferred copper 25-4
preferred fiber 25-4
condition groups
for ACLs 18-42, 19-8
MAC groups 18-46
network groups 18-43
port groups 18-47
sample configuration 18-42
service groups 18-45
verify information about 18-50
conditions
combined with actions 18-8, 18-9
configuring 18-33
for ACLs 19-9
how to create 18-33
see also condition groups
testing before applying 18-39
valid combinations 18-6
valid combinations for ACLs 19-6
Configuring 802.1AB
application examples 1-3
D
debug messages 24-8
debug qos command 18-19
default route
IP 6-12
IPX 12-7
defaults
10/100/1000 ports 25-3
802.1AB 1-2
802.1Q 3-2
802.1X 15-2
ACLs 16-2, 19-3
assigning ports to VLANs 11-2
authentication servers 13-3
combo ports 25-3
DHCP Relay 10-3
DVMRP 6-2
dynamic link aggregation 5-3
Ethernet OAM 9-2
Ethernet ports 25-2, 25-3
interswitch protocols 2-2
IP 6-2
IPMS 20-4, 20-5
IPv6 7-2
IPX 12-2
Learned Port Security 4-2
mobile ports 11-2
Multiple Spanning Tree 8-4
Network Security 27-2
policy servers 17-2
Port Mapping 12-2
port mirroring 23-3
port monitoring 23-5, 23-7
QoS 18-10
RDP 9-2
RDP interface 9-8
RIP 8-2
RMON 23-11
RRSTP 8-5
Server Load Balancing 22-3
source learning 2-2
Spanning Tree Bridge 8-3
Spanning Tree Port 8-4
static link aggregation 4-2
switch health 23-13
switch logging 24-3
UDLD 26-2
VLAN rules 13-2
VLANs 5-2
VRRP 11-3
Denial of Service
see DoS
DHCP 10-6
used with 802.1X 15-8
DHCP Relay 10-1, 10-10
application examples 10-4, 10-7, 10-8
authenticated VLANs 10-6
AVLAN forwarding option 10-11
defaults 10-3
DHCP server IP address 10-9
forward delay time 10-10
maximum number of hops 10-11
standard forwarding option 10-11
statistics 10-24
DHCP servers
AV-Client 14-24
for authentication clients 14-29
Telnet authentication clients 14-7
Web browser authentication clients 14-8
DHCP VLAN rules 13-5
directed broadcast 6-22
disposition 19-10
ACLs 19-5, 19-7
global defaults for QoS rules 18-14

Table of Contents

Other manuals for Alcatel-Lucent OmniSwitch 6800 Series

Related product manuals