OmniSwitch 6800/6850/9000 Network Configuration Guide March 2008 page -7
ipx route command 12-8
IPX router ports 5-12
ipx routing command 12-6
ipx timers command 12-9
ipx type-20-propagation command 12-8
J
jumbo frames 25-2, 25-6
L
label.txt 14-8
LACP
see dynamic link aggregation
lacp agg actor admin key command 5-4, 5-12
lacp agg actor admin state command 5-19
lacp agg actor port priority command 5-22
lacp agg actor system id command 5-20
lacp agg actor system priority command 5-21
lacp agg partner admin key command 5-25
lacp agg partner admin port command 5-27
lacp agg partner admin port priority command 5-27
lacp agg partner admin state command 5-23
lacp agg partner admin system id command 5-25
lacp agg partner admin system priority command 5-26
lacp linkagg actor admin key command 5-15
lacp linkagg actor system id command 5-16
lacp linkagg actor system priority command 5-16
lacp linkagg admin state command 5-15
lacp linkagg name command 5-14
lacp linkagg partner admin key command 5-17
lacp linkagg partner system id command 5-18
lacp linkagg partner system priority command 5-17
lacp linkagg size command 5-4, 5-11
Layer 2
statistics counters 25-9
Layer 2 Authentication
see authenticated VLANs
LDAP accounting servers
dynamic log 13-26
standard attributes 13-24
used for authenticated VLANs 14-35
LDAP authentication servers
directory entries 13-19
functional privileges 13-23
passwords for 13-22
schema extensions 13-19
SNMP attributes on authentication servers 13-24
SSL 13-28
VSAs for Authenticated Switch Access 13-23
LDAP servers
see policy servers
used for QoS policies 17-3
Learned Port Security
database table 4-6
defaults 4-2
disabling 4-7
enabling 4-7
overview 4-4
specifications 4-2
Learned Port Security Configuration
Application example 4-3
Lightweight Directory Access Protocol
see LDAP servers
line speed 25-14, 25-20
link aggregation
802.1Q 3-5
dynamic link aggregation 5-1
enabling tagging 3-5
Spanning Tree parameters 8-30, 8-31, 8-33, 8-35, 8-37
static link aggregation 4-1
lldp lldpdu command 1-3
lldp notification command 1-3
lldp tlv dot1 command 1-8
lldp tlv dot3 command 1-9
lldp tlv management command 1-3
lldp tlv med command 1-9
logged events
detail level 18-20
sent to PolicyView 18-20
types of events 18-19
M
MAC address table 2-1, 2-4
aging time 2-8
duplicate MAC addresses 2-4
learned MAC addresses 2-4
static MAC addresses 2-4
MAC address VLAN rules 13-6
MAC addresses
aging time 2-8, 8-24
dynamic link aggregation 5-16, 5-18, 5-20, 5-25
learned 2-4
statically assigned 2-4
mac-address-table command 2-4
mac-address-table-aging-time command 2-8
Maintenance Domain 9-3
map groups 18-51
application 18-61
creating 18-52
verifying information 18-53
master router
VRRP 11-7
MLD Zapping 20-33
mobile port properties 11-16
authentication 11-17
BPDU ignore 11-11
default VLAN membership 11-12
restore default VLAN 11-12
mobile ports 11-11
application examples 11-3, 11-6, 11-8
authentication 5-11
defaults 11-2
dynamic VLAN port assignment 11-4, 11-12
secondary VLANs 11-13
To Next Page
Loading...
