page -8 OmniSwitch 6800/6850/9000 Network Configuration Guide March 2008
trusted 18-5, 18-28
VLAN rules 13-1
MST 3-4
application example 3-14
Internal Spanning Tree (IST) Instance 3-9
Interoperability 3-12
Migration 3-12, 3-13
MSTI 3-7
application example 3-16
MSTP 3-4
Multiple Spanning Tree Region 3-8
Multicast Listener Discovery (MLD) 20-24
Multiple Spanning Tree
defaults 8-4
N
netsec group anomaly command 27-3
netsec group port command 27-3
network address VLAN rules 13-6
Network Security
application examples 27-3
defaults 27-2
non combo ports
configuring 25-14
Novell
IPX 12-1
O
OSPF 8-4
OSPF redistribution policies
deleting 6-18, 6-20, 7-20, 7-22, 8-16
P
pending configuration 18-54
pending policies
deleting 18-55
testing 18-39
Per VLAN DHCP 10-9
PIM-SM 20-8
ping
IP 6-31
IPX 12-10
ping command 6-31
ping ipx command 12-10
policies
application examples 18-57
applied 18-54
built-in 18-12
conditions 18-33
creating policy actions 18-34
how the switch uses them 18-4
Policy Based Routing 18-62
precedence 18-37, 19-6
redirect linkagg 18-59
redirect port 18-59
rules 18-35
verify information about 18-38
policies configured via PolicyView 18-56
policy
for ACLs 19-11
policy actions 19-10
policy conditions 19-9
policy rule 19-11
policy action 802.1p command 18-28
policy action command 18-24, 18-31
policy action map command 18-51
policy action redirect linkagg command 18-59
policy action redirect port command 18-59, 18-60
policy actions
see actions
Policy Based Routing 18-62
policy condition command 18-31
policy conditions
see conditions
policy mac group command 18-42, 19-8
policy MAC groups 18-46
policy map group command 18-51
policy map groups
application example 18-51
policy network group command 18-42, 19-8
policy network groups 18-43
switch default group 18-12, 18-43
policy port group command 18-42, 19-8
policy port groups 18-47
policy rule command 18-31
policy server command 17-2, 17-4
policy server flush command 17-6
compared to
qos flush command 17-7
policy server load command 17-6
policy servers
defaults 17-2
downloading policies 17-6
installing 17-3
SSL 17-6
policy service command 19-8
policy service group command 18-42, 19-8
policy service groups 18-45
policy services 18-44
PolicyView
LDAP policy servers 17-1
Port Based Network Access Control
see 802.1X
Port Mapping 12-1
application examples 12-2, 12-6
defaults 12-2
specifications 12-2
port mapping command 12-2
Port Mapping Session
creating and deleting 12-3
enabling and disabling 12-4
port mirroring 23-14
application examples 23-4
defaults 23-3
direction 23-22
disabling mirroring status 23-21
displaying status 23-23
To Next Page
Loading...
