Benelli TRK 502 - Installation of the Gearchange Lever

4 - 102
CYCLING
INSTALLATION OF THE GEARCHANGE LEVER
Park the bike on a level surface.
IMPORTANT NOTICE
Prop the bike on suitable supports so that it cannot fall.
Install:
Proceed using the opposite order to removal.
Tighten:
• the screw (1) Fig. A
to the following torque:
T
.
R
.
Torque 10 N*m
NOTE:_________________________________
Make use of grease during the assembly.
G
Recommended lubricant
MR2 TUTELA GREASE
A
1
COPY - Moto GB - Grant Martland - grantmartland@motogb.co.uk