Benelli TRK 502 - Oil Sump and Intake Filter Installation

5 - 59
LUBRICATION SYSTEM
OIL SUMP AND INTAKE FILTER INSTALLATION
Install:
Proceed using the opposite order to removal.
• Tighten the screws fastening the oil sump (E) to the fol-
lowing torque:
T
.
R
.
Torque 0.6 N*m
Tighten:
• the magnetic cap, complete with copper washer, to the
following torque:
T
.
R
.
Torque 25 N*m
NOTE:_________________________________
Add engine oil once these steps have been completed.
C
E
COPY - Moto GB - Grant Martland - grantmartland@motogb.co.uk