Benelli TRK 502 - Distribution Chain Tensioner Removal

5 - 9
DISTRIBUTION CHAIN TENSIONER REMOVAL
Remove:
1. the screws (C)
2. the screw (B)
3. the washer
4. the seal
NOTE:_________________________________
Operation to perform with the engine in TDC.
Using the special tool during the removal stage, keep the
tensioner retracted, Fig. I., then remove the two screws “C”
Fig. G.
(*) Tool: Chain tensioner lock tool
Code: 0320097046001
G
A
C
B
HEAD DISTRIBUTION
I
COPY - Moto GB - Grant Martland - grantmartland@motogb.co.uk