EasyManuals Logo

Benelli TRK 502 Service Station Manual

Benelli TRK 502
408 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #41 background imageLoading...
Page #41 background image
3 - 5
PERIODIC MAINTENANCE AND LUBRICATION INTERVALS
NOTE:___________________________________________
In general, maintenance needs to be carried out with the motorcycle on the rear stand, engine off and switch in “OFF” posi-
tion.
While checking uid levels, it is preferable to keep the motorcycle upright without using the rear stand.
Annual checks are to be carried out every year unless maintenance is carried out basing on the maintenance service system
according to the mileage travelled.
At 40,000 km (24,854 mi), repeat maintenance services from the one at 10,000 km (6,213 mi). For interventions relating the
items marked, it is advisable to contact a Benelli dealer, given that it is necessary to have speci c equipment, information,
and technical skills.
The following section shows all maintenance operations.
KEY
I Checking, adjustment, cleaning, lubrication or replacement as required
R Replacement
T Tighten
Dealer
NOTE:___________________________________________
AIR FILTER
• Replace the air lter more frequently when the vehicle is used in particularly damp or dusty environments.
HYDRAUILC BRAKE MAINTENANCE
• Check brake
uid levels on a regular basis and top up, if necessary.
• Replace the inner parts of the brake/calliper pump every two years and change the brake uid.
• Replace the brake hoses every 4 years, or before if cracked or damaged.
COPY - Moto GB - Grant Martland - grantmartland@motogb.co.uk

Table of Contents

Other manuals for Benelli TRK 502

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Benelli TRK 502 and is the answer not in the manual?

Benelli TRK 502 Specifications

General IconGeneral
Displacement500 cc
Transmission6-speed
Fuel Tank Capacity20 liters
Seat Height800 mm
Wet Weight235 kg
Bore x Stroke69 mm x 66.8 mm
Compression Ratio11.5:1
ClutchWet multi-plate
FrameSteel trellis
Wheelbase1505 mm
Ground Clearance190 mm
Max Power47.6 hp (35 kW) @ 8500 rpm
Max Torque46 Nm @ 6000 rpm
Front Suspension50 mm upside-down fork
Front BrakeDouble floating discs, 320mm, 4-piston calipers
Rear BrakeSingle 260 mm disc
Fuel SystemElectronic Fuel Injection (EFI)
ABSDual-channel ABS
Front Tire120/70 R17
Rear Tire160/60 R17
Engine TypeLiquid-cooled, four-stroke, parallel twin cylinder, DOHC, 4 valves per cylinder

Related product manuals