Benelli TRK 502 - Gear Position Sensor

ELE. - 20
GEAR POSITION SENSOR
It is situated on the left side of the engine, close to the pinion,
and detects the position of the gear.
Disconnect:
• The electrical coupling.
Remove:
• The gear position sensor from the half casing.
Check:
• The continuity.
Ø 3: Neutral
Ø 3.5: Grey for Neutral
1.  brown/yellowrstgear
2. green/black second gear
3. green/blue third gear
4. yellow/blue fourth gear
5.  brown/redfthgear
6. yellow/red sixth gear
SENSORS
COPY - Moto GB - Grant Martland - grantmartland@motogb.co.uk