Canon imagePROGRAF IPF720 User Manual

Handling rolls
Loading Rolls on the Roll Holder
When printing on rolls, attach the Roll Holder to the roll.
Attach the 2-inch or 3-inch paper core attachment to the roll holder , depending on the size of the paper core of the
roll you will use. The printer is delivered with the 2-inch paper core attachment installed. ( → P .129)
Important
• Cut the edge of the roll paper if it is uneven, dirty , or has tape residue. Otherwise, it may cause feeding
problems and af fect the printing quality . Be careful not to cut through any barcodes printed on the roll.
• Wind up the roll so that the edge is even across the roll. This may cause feeding problems.
Caution
• Set the roll on a table or other at surface so that it does not roll or fall. Rolls are heavy , and dropping a
roll may cause injury .
Note
• For details on supported sizes and types of rolls, see “Paper Sizes” or the Paper Reference Guide .
( → P .101) ( → P .96)
• After pressing the Load/Eject button, you can refer to instructions on the Display Screen as you load
the paper .
1. Lift the Holder Stopper lever (a) from the shaft side to unlock it. Holding the Holder Stopper at
the position indicated (b), remove it from the Roll Holder .
Handling Paper 107

Canon imagePROGRAF IPF720 Specifications

Operating Environment

temperature range	59 – 86 F° (15 – 30 C°)
relative humidity	10 – 80% (No Condensation)
acoustic noise operation	52dB (A) or Less

Print Specifications

print resolution max	2400 x 1200 dpi
line accuracy	±0.1% or Less
minimum line weight	0.02mm

Ink and Print-Head

number of nozzles matte black	5, 120 Nozzles
number of nozzles other colors	2, 560 Nozzles per Color
droplet size	4 Picoliter

Media Handling

media width roll feed	10" – 36" (254mm – 914.4mm)
cut sheet width	8" – 36" (203.2mm – 914.4mm)
maximum print length roll feed	59' (18m)

Power

power supply	AC 100–240V (50-60Hz)
power consumption maximum	140W or Less
power off consumption	1W or Less

Weight and Dimensions

printer dimensions	43.1" x 59.3" x 34.3"
dimensions in mm	1507mm x 871mm x 1094mm
weight with stand	Approx. 141 lb (64kg)