Canon imagePROGRAF IPF720 User Manual

Messages regarding ink
Messages regarding ink
Ink insufcient.
Cause Corrective Action
The ink level is low , so you cannot clean the
Printhead .
Press the OK button and replace the Ink T ank that is
low with a new Ink T ank .
( → P .508)
The ink level is low , so there may not be enough ink
to nish printing.
Press the OK button and replace the Ink T ank that is
low with a new Ink T ank .
( → P .508)
Y ou can print until the ink runs out by pressing the
Online button. However , if the ink runs out during
printing, the following situation will occur depending
on the position of the leading edge when it passes
through the printer .
1. No ink left. is displayed and printing stops. Press
the Stop button to cancel printing, or press the
OK button, replace the ink tank that is low with a
new one, and continue printing. However , note
that because printing is paused, colors may be
slightly dif ferent.
( → P .508)
2. Ink tank empty . Canceling printing of this
page. is displayed and printing stops. After the
paper is ejected, press the OK button and replace
the ink tank that is low with a new one.
( → P .508)
No ink left.
Cause Corrective Action
There is no ink left. Open the Ink T ank Cover and replace the Ink T ank
for which the Ink Lamp is ashing.
( → P .508)
Error Message 585

Canon imagePROGRAF IPF720 Specifications

Operating Environment

temperature range	59 – 86 F° (15 – 30 C°)
relative humidity	10 – 80% (No Condensation)
acoustic noise operation	52dB (A) or Less

Print Specifications

print resolution max	2400 x 1200 dpi
line accuracy	±0.1% or Less
minimum line weight	0.02mm

Ink and Print-Head

number of nozzles matte black	5, 120 Nozzles
number of nozzles other colors	2, 560 Nozzles per Color
droplet size	4 Picoliter

Media Handling

media width roll feed	10" – 36" (254mm – 914.4mm)
cut sheet width	8" – 36" (203.2mm – 914.4mm)
maximum print length roll feed	59' (18m)

Power

power supply	AC 100–240V (50-60Hz)
power consumption maximum	140W or Less
power off consumption	1W or Less

Weight and Dimensions

printer dimensions	43.1" x 59.3" x 34.3"
dimensions in mm	1507mm x 871mm x 1094mm
weight with stand	Approx. 141 lb (64kg)