Canon imagePROGRAF IPF720 User Manual

Adjusting Images
Enhanced Printing Options
Adjusting Images
Adjusting the Color in the Printer Driver
Color settings specied in the application for your documents are essentially given priority over other settings
for each print job, but further color adjustment is possible in the printer driver .
Color Mode
Choose how the printer driver processes color , as desired.
The available options vary depending on the color mode.
Color Mode
Description Color Adjustment
Color Print in color . Y ou can adjust the color balance and
color-matching method.
Monochrome Print in grayscale. Y ou can adjust the color balance.
Color (CAD) A color mode optimized for line drawings
(2D-CAD). Lines in red, yellow , and other
colors are printed especially clearly .
Color (CAD) enables adjustment of color
settings. ( → P .159)
Y ou can adjust the color balance.
Monochrome (BK
ink)
A color mode for printing line drawings.
Only Black ink is used.
Y ou can adjust the color balance.
Monochrome Bitmap Print in a color mode for CAD, using
Color Ink , with all non-white portions
printed in black.
No color adjustment is supported.
Color Adjustment
Y ou can adjust colors separately for images, graphics, and text documents.
Adjustment Item
Description
Cyan
Magenta
Y ellow
Fine-tune color tones by adjusting the levels of Cyan , Magenta , and Y ellow .
Gray T one Adjust gray tones to suit the images of monochrome photos. Choose cool black
(tinged with blue), pure black (neutral), warm black (tinged with red), and so on.
Select the color tone in the color region or from the list.
Brightness Adjust the brightness of printed images while keeping the darkest and lightest
portions intact.
Contrast Adjust the contrast of the darkest and lightest portions relative to each other .
For soft gradation, decrease the contrast. For hard gradation, increase the contrast.
Saturation Adjust the level of color saturation, in a range from subdued to vivid.
172 Enhanced Printing Options

Canon imagePROGRAF IPF720 Specifications

Operating Environment

temperature range	59 – 86 F° (15 – 30 C°)
relative humidity	10 – 80% (No Condensation)
acoustic noise operation	52dB (A) or Less

Print Specifications

print resolution max	2400 x 1200 dpi
line accuracy	±0.1% or Less
minimum line weight	0.02mm

Ink and Print-Head

number of nozzles matte black	5, 120 Nozzles
number of nozzles other colors	2, 560 Nozzles per Color
droplet size	4 Picoliter

Media Handling

media width roll feed	10" – 36" (254mm – 914.4mm)
cut sheet width	8" – 36" (203.2mm – 914.4mm)
maximum print length roll feed	59' (18m)

Power

power supply	AC 100–240V (50-60Hz)
power consumption maximum	140W or Less
power off consumption	1W or Less

Weight and Dimensions

printer dimensions	43.1" x 59.3" x 34.3"
dimensions in mm	1507mm x 871mm x 1094mm
weight with stand	Approx. 141 lb (64kg)