Canon imagePROGRAF IPF720 User Manual

Other Messages
T op cover is open.
Cause Corrective Action
Open the T op Cover fully , remove any foreign objects,
and close the T op Cover again.
The printer has detected that the T op Cover is open.
If the error occurs again, turn of f the printer and wait
a while before restoring power .
Carriage Cover is open.
Cause Corrective Action
Close the Carriage Cover .
( → P .518)
The Carriage Cover is open.
If the error occurs again, turn of f the printer and wait
a while before restoring power .
Prepare for parts replacement.
Cause Corrective Action
It is almost time to replace consumables for which
service is required.
If Parts replacement time has passed. is displayed,
you can continue to use the printer for some time.
Contact your Canon dealer for assistance.
Parts replacement time has passed.
Cause Corrective Action
It is past the recommended time to replace
consumables for which service is required.
Contact your Canon dealer for assistance.
Unknown le.
Cause Corrective Action
Invalid data format. Check the print job and resend it.
Multi-sensor error
Cause Corrective Action
Direct sunlight or strong lighting may be shining on
the printer and causing the sensor to malfunction.
T ake steps to ensure the printer is not used when
exposed to direct sunlight or strong lighting.
The performance of a sensor inside the printer may
be impaired.
Contact your Canon dealer for assistance.
Error Message 595

Canon imagePROGRAF IPF720 Specifications

Operating Environment

temperature range	59 – 86 F° (15 – 30 C°)
relative humidity	10 – 80% (No Condensation)
acoustic noise operation	52dB (A) or Less

Print Specifications

print resolution max	2400 x 1200 dpi
line accuracy	±0.1% or Less
minimum line weight	0.02mm

Ink and Print-Head

number of nozzles matte black	5, 120 Nozzles
number of nozzles other colors	2, 560 Nozzles per Color
droplet size	4 Picoliter

Media Handling

media width roll feed	10" – 36" (254mm – 914.4mm)
cut sheet width	8" – 36" (203.2mm – 914.4mm)
maximum print length roll feed	59' (18m)

Power

power supply	AC 100–240V (50-60Hz)
power consumption maximum	140W or Less
power off consumption	1W or Less

Weight and Dimensions

printer dimensions	43.1" x 59.3" x 34.3"
dimensions in mm	1507mm x 871mm x 1094mm
weight with stand	Approx. 141 lb (64kg)