Canon imagePROGRAF IPF720 - Printer Specifications; Printing Performance; Specifications

Printer Specications
Printer Specications
Specications
Important
• This information is subject to change as the printer is updated.
• The following values may vary depending on the operating environment.
Printer
Power supply 100-120 V AC (50/60 Hz), 220-240 V AC (50/60 Hz)
During operation 140 W max.
Sleep mode 100-120 V : 5 W max.
(10 W max. when an IEEE 1394 (FireWire)
expansion board is installed.)
220-240 V : 6 W max.
(1 1 W max. when an IEEE 1394 (FireWire)
expansion board is installed.)
Power consumption
Of f 1 W max. ( *1 )
During operation Approx. 52 dB (A) max.Operating noise
Standby Approx. 35 dB (A) max.
T emperature 15-30°C (59-86°F)Operating environment
Humidity 10-80%, non-condensing
Dimensions (W × D × H) Printer and Stand
(including Roll Holder
and Output Stacker )
1,507× 871 × 1,097 mm (59.3 × 34.3 × 43.2 in)
W eight Printer and Stand (not
including the Printhead
and Ink T ank )
65 kg (143.3 lb)
Space for installation (W × D × H) 2,307× 2,071 × 2,000 mm (90.8 × 81.5 × 78.7 in)
Applicable standards International Energy Star Program, Law on
Promoting Green Purchasing, GPN, RoHS, The Eco
Declaration, WEEE, U.S. presidential directives,
J-MOSS (Green Mark)
*1: The printer uses a trace amount of power even when turned of f. T o stop all power consumption,
turn of f the printer and unplug the power cord.
Printing performance
Print method Bubblejet
Maximum resolution 2400 dpi horizontally ( *1 ) × 1200 dpi vertically
Printhead PF-03
Number of nozzles
• MBK: 5,120
• 2,560 nozzles each for BK, C, M, and Y
*1: Prints with a minimum 1/2400 inch dot pitch between ink droplets.
74 Printer Parts