Canon imagePROGRAF IPF720 - Page 89

Printer Specications
Interface
Expansion Board Slots 1
Format Internal port
Mode Full-speed (12 Mbps), high-speed (480 Mbps)
USB 2.0( *1 )
Connector Series B (4-pin)
Format Internal port
Specication IEEE 802.3 10BASE-T , IEEE 802.3u 100BASE-TX
/Auto-Negotiation, IEEE 802.3x Full Duplex
Ethernet
Protocols IPX/SPX (Netware 4.2, 5.1, 6.0), SNMP , HTTP , TCP/IP ,
AppleT alk
Format Optional board (compatible with the expansion slot)
Specication IEEE 1394-1995, conforms to P1394a Specication ver . 2.0,
half duplex, Data/Strb dif ferential serial
T ransfer speed 100/200/400 Mbps
IEEE 1394
Connector Conforms to IEEE 1394-1995 (6-pin), no power supply
*1: Use in USB 2.0 High Speed mode requires the following environment:
• Computer: USB 2.0 High-Speed-compatible
• Operating system: Windows V ista/Windows Server 2003/Windows XP/Windows
2000 or Mac OS X ver . 10.3.3 or later
• USB 2.0 driver: Microsoft USB 2.0 driver (available from Windows Update or the Service Pack.)
• USB cable: Certied USB 2.0 cable
Ink
BK Ink T ank ( Black Ink ) Dye ink PFI-102BK
MBK Ink T ank ( Matte Black Ink , or black ink
for matte paper)
Pigment ink PFI-102MBK
C Ink T ank ( Cyan Ink ) Dye ink PFI-102C
M Ink T ank ( Magenta Ink ) Dye ink PFI-102M
Ink T ank
Y Ink T ank ( Y ellow Ink ) Dye ink PFI-102Y
Capacity 130 ml (4.4  oz) per color ( *1 )
*1: The provided Starter Ink T anks contain 90 ml (3.0  oz) each.
Printer Parts 75