Handling rolls
Roll Holder Set
A set of parts comprising the Roll Holder , Holder Stopper , 2-Inch Paper Core Attachment , and 3-Inch Paper
Core Attachment .
T o load a roll with a 3-inch paper core, remove the 2-Inch Paper Core Attachment from the Holder Stopper
and then attach the 3-Inch Paper Core Attachment on both the Roll Holder and Holder Stopper .
T o load a roll with a 2-inch paper core, remove the 3-Inch Paper Core Attachment from both the Roll Holder
and Holder Stopper and then attach the 2-Inch Paper Core Attachment on the Holder Stopper . ( → P .129)
• Roll Holder Set RH4-32 (for 2- and 3-inch paper cores)
128 Handling Paper
To Next Page
Loading...
