Canon imagePROGRAF IPF720 User Manual

Messages regarding ink
Remaining level of the ink cannot be correctly detected.
Cause Corrective Action
Ink level detection cannot work correctly if you use
rell ink tanks.
The rell ink tank can no longer be used. See the
section “Ink level detection” and take the appropriate
action.
( → P .572)
Ink Level: Check
Cause Corrective Action
Not much ink is left. Prepare a new Ink T ank .
W e recommend replacing the Ink T ank with a new Ink
T ank at this point if you plan to print large-format or
high-quantity jobs.
No ink tank loaded.
Cause Corrective Action
There is no Ink T ank of the indicated color in the
printer .
Load or reload the Ink T ank .
( → P .508)
There is a problem with the Ink T ank . Replace it with a new Ink T ank .
( → P .508)
Ink tank error .
Cause Corrective Action
The Ink T ank in the printer is incompatible. Load an Ink T ank specied for use with the printer .
( → P .508)
586 Error Message

Canon imagePROGRAF IPF720 Specifications

Operating Environment

temperature range	59 – 86 F° (15 – 30 C°)
relative humidity	10 – 80% (No Condensation)
acoustic noise operation	52dB (A) or Less

Print Specifications

print resolution max	2400 x 1200 dpi
line accuracy	±0.1% or Less
minimum line weight	0.02mm

Ink and Print-Head

number of nozzles matte black	5, 120 Nozzles
number of nozzles other colors	2, 560 Nozzles per Color
droplet size	4 Picoliter

Media Handling

media width roll feed	10" – 36" (254mm – 914.4mm)
cut sheet width	8" – 36" (203.2mm – 914.4mm)
maximum print length roll feed	59' (18m)

Power

power supply	AC 100–240V (50-60Hz)
power consumption maximum	140W or Less
power off consumption	1W or Less

Weight and Dimensions

printer dimensions	43.1" x 59.3" x 34.3"
dimensions in mm	1507mm x 871mm x 1094mm
weight with stand	Approx. 141 lb (64kg)