Canon imagePROGRAF IPF720 User Manual

Messages regarding paper
Messages regarding paper
Paper Mismatch
Cause Corrective Action
Y ou printed a test pattern for printer adjustment on
several sheets, but sheets of dif ferent types or sizes
of paper were used.
When printing a test pattern, use sheets of the same
type and size of paper .
Papr T ype Mismatch
Cause Corrective Action
Make sure the same type of paper is specied on the
printer as in the printer driver .
( → P .82)
( → P .86)
Follow these steps to ensure the paper type matches
on the printer and in the printer driver .
1. Hold down the Stop button for a second or more
to cancel printing.
2. Either change the type of paper specied in the
printer driver settings or replace the loaded paper
and change the paper type setting on the printer .
The paper type as specied on the printer does not
match the type specied in the printer driver .
Press the Online button to resume printing.
However , this may cause a paper jam or printing
problem.
*Printing will continue if you have set Detect Mismatch to W arning or None .
Papr Size Mismatch
Cause Corrective Action
Adjust the paper size setting in the printer driver to
match the size loaded in the printer as follows.
1. Hold down the Stop button for a second or more
to cancel printing.
2. Change the paper size setting in the printer driver
to the size loaded in the printer and try printing
again.
Replace the loaded paper with paper of a size that
matches the size setting in the printer driver as
follows.
1. Hold down the Stop button for a second or more
to cancel printing.
2. Replace the loaded paper to match the paper size
setting in the printer driver and try printing again.
The paper size as specied on the printer does not
match the size specied in the printer driver .
Press the Online button to resume printing.
However , this may cause a paper jam or printing
problem.
578 Error Message

Canon imagePROGRAF IPF720 Specifications

Operating Environment

temperature range	59 – 86 F° (15 – 30 C°)
relative humidity	10 – 80% (No Condensation)
acoustic noise operation	52dB (A) or Less

Print Specifications

print resolution max	2400 x 1200 dpi
line accuracy	±0.1% or Less
minimum line weight	0.02mm

Ink and Print-Head

number of nozzles matte black	5, 120 Nozzles
number of nozzles other colors	2, 560 Nozzles per Color
droplet size	4 Picoliter

Media Handling

media width roll feed	10" – 36" (254mm – 914.4mm)
cut sheet width	8" – 36" (203.2mm – 914.4mm)
maximum print length roll feed	59' (18m)

Power

power supply	AC 100–240V (50-60Hz)
power consumption maximum	140W or Less
power off consumption	1W or Less

Weight and Dimensions

printer dimensions	43.1" x 59.3" x 34.3"
dimensions in mm	1507mm x 871mm x 1094mm
weight with stand	Approx. 141 lb (64kg)