Canon imagePROGRAF IPF720 User Manual

Handling rolls
5. Holding the paper on both sides, pull the jammed portion out toward the front. Use a scissors
to cut away the printed or wrinkled portion.
Caution
• When cutting paper , be careful to avoid injury and damaging the printer .
6. If the Carriage is on the left, move the Carriage to the right until it stops.
Important
• Always move the Carriage to the right side. If the Carriage is on the left, a Carriage error may
occur when you turn on the printer .
7. Pull the roll edge gently and align it with the Paper Alignment Line (a). Lower the Release
Lever toward the front.
Important
• Do not force the roll paper into alignment with the Paper Alignment Line (a). This may prevent the
paper from being advanced straight.
• The amount of paper pulled from the roll corresponds to the margin of the leading edge.
1 16 Handling Paper

Canon imagePROGRAF IPF720 Specifications

Operating Environment

temperature range	59 – 86 F° (15 – 30 C°)
relative humidity	10 – 80% (No Condensation)
acoustic noise operation	52dB (A) or Less

Print Specifications

print resolution max	2400 x 1200 dpi
line accuracy	±0.1% or Less
minimum line weight	0.02mm

Ink and Print-Head

number of nozzles matte black	5, 120 Nozzles
number of nozzles other colors	2, 560 Nozzles per Color
droplet size	4 Picoliter

Media Handling

media width roll feed	10" – 36" (254mm – 914.4mm)
cut sheet width	8" – 36" (203.2mm – 914.4mm)
maximum print length roll feed	59' (18m)

Power

power supply	AC 100–240V (50-60Hz)
power consumption maximum	140W or Less
power off consumption	1W or Less

Weight and Dimensions

printer dimensions	43.1" x 59.3" x 34.3"
dimensions in mm	1507mm x 871mm x 1094mm
weight with stand	Approx. 141 lb (64kg)