Cleaning the Printer
3. Using a damp cloth that you have wrung out completely , wipe inside the T op Cover to clean it.
Wipe away any ink residue on the T op Cover Roller (a), all over the Platen (b), the Paper Retainer
(c), the Borderless Printing Ink Grooves (d), the Ejection Guide (e), and the guide rail (f).
Important
• Do not use a dry cloth to wipe inside the T op Cover . This may create a static charge, which may
attract dust and af fect the printing quality .
• Never use ammable solvents such as alcohol, benzene, or thinner . If these substances come into
contact with electrical components inside the printer , there is a risk of re or electrical shock.
• Never touch the Linear Scale (a) or Carriage Shaft (b).
4. Close the T op Cover .
Maintenance 539
To Next Page
Loading...
