Canon imagePROGRAF IPF720 User Manual

Control Panel
Setting Item Description, Instructions
Auto Rotate If the long side of an original is shorter than the roll width, the
original is automatically rotated 90 degrees to conserve paper .
Similarly , if the long side of an original in landscape orientation
is longer than the roll width and the short side is shorter than the
roll width, the original is repositioned to t on the paper .
HP R TL print jobs are not rotated.( *1 )
Use Nesting Selecting On will store print jobs until multiple documents can
be arranged to ll up the roll width, instead of printing each print
job as it is received.
Nesting W aitT ime Specify a time to wait until printing, as desired.
Nesting
Cut Lines Select On to print cut lines between each document on the roll.
On-the-Fly Selecting On will start printing jobs sooner if you are printing
only HP R TL print jobs and printing would not start until later .
However , images may be omitted in some cases, so be sure
to check the printing results.
PageSizeProcess1 Selecting On will print at the specied paper size. However , a 3
mm margin is subtracted from the paper size at each edge when
printing; this margin is left blank.
Normally , the area available for printing excludes a margin
required by the printer , and images are positioned accordingly .
Selecting On in this setting eliminates any misalignment of the
printing position if the image itself includes a border .
ProcessingOption
PageSizeProcess2 Selecting On will determine the paper size based on the image
rendering area.
*1: Because HP R TL images are not rotated even if the paper is rotated 90 degrees, images may be cut of f
or the blank paper may be ejected. In this case, set Auto Rotate to Off .
56 Printer Parts

Canon imagePROGRAF IPF720 Specifications

Operating Environment

temperature range	59 – 86 F° (15 – 30 C°)
relative humidity	10 – 80% (No Condensation)
acoustic noise operation	52dB (A) or Less

Print Specifications

print resolution max	2400 x 1200 dpi
line accuracy	±0.1% or Less
minimum line weight	0.02mm

Ink and Print-Head

number of nozzles matte black	5, 120 Nozzles
number of nozzles other colors	2, 560 Nozzles per Color
droplet size	4 Picoliter

Media Handling

media width roll feed	10" – 36" (254mm – 914.4mm)
cut sheet width	8" – 36" (203.2mm – 914.4mm)
maximum print length roll feed	59' (18m)

Power

power supply	AC 100–240V (50-60Hz)
power consumption maximum	140W or Less
power off consumption	1W or Less

Weight and Dimensions

printer dimensions	43.1" x 59.3" x 34.3"
dimensions in mm	1507mm x 871mm x 1094mm
weight with stand	Approx. 141 lb (64kg)